Skip Navigation
menu

Images

Preparing to Pin the Mole

NASA InSight's robotic arm will use its scoop to pin the spacecraft's heat probe, or "mole," against the wall of its hole.

October 03, 2019

NASA InSight's robotic arm will use its scoop to pin the spacecraft's heat probe, or "mole," against the wall of its hole. The mole is part of an instrument formally called the Heat Flow and Physical Properties Package, or HP3, provided by the German Aerospace Center (DLR).

Credits

NASA/JPL-Caltech

ENLARGE

Related

This image shows InSight's domed Wind and Thermal Shield, which covers its seismometer. The image was taken on the 110th Martian day, or sol, of the mission. The seismometer is called Seismic Exper...
More
This image shows InSight's domed Wind and Thermal Shield, which covers its seismometer. The image was taken on the 110th Martian day, or sol, of the mission. The seismometer is called Seismic Experiment for Interior Structure, or SEIS.
InSight's Seismometer on the Martian Surface
This artist's concept depicts the stationary NASA Mars lander known by the acronym InSight at work studying the interior of Mars. The InSight mission is scheduled to launch in May 2018 and land on ...
More
This artist's concept depicts the stationary NASA Mars lander known by the acronym InSight at work studying the interior of Mars.
Artist's Concept of InSight Lander on Mars (Annotated)
NASA InSight scientist/engineer Troy Hudson gives us the game plan for getting the mission's heat probe, also known as the "mole," digging again on Mars.
More
NASA InSight scientist/engineer Troy Hudson gives us the game plan for getting the mission's heat probe, also known as the "mole," digging again on Mars.
NASA InSight: A Plan to Get the Mole Moving Again
NASA’s Jet Propulsion Laboratory presents "On a Mission," a new podcast that explores a single mission to outer space. Season 1, which launches October 29, is all about the InSight mission to Mars.
More
NASA’s Jet Propulsion Laboratory presents "On a Mission," a new podcast that explores a single mission to outer space. Season 1, which launches October 29, is all about the InSight mission to Mars.
Preview: On a Mission
NASA InSight recently moved its robotic arm closer to its digging device, called the "mole," in preparation to push on its top, or back cap
More
NASA InSight recently moved its robotic arm closer to its digging device, called the "mole," in preparation to push on its top, or back cap.
InSight Prepares to Push on the Mole
NASA's two MarCO CubeSats will be flying past Mars in September 2016 just as NASA's next Mars lander, InSight, is descending through the Martian atmosphere and landing on the surface.
More
Artist's concept showing two small satellites flying over Mars as the InSight lander parachutes through the surface of Mars.
Interplanetary CubeSat for Technology Demonstration at Mars
One of InSight's 7-foot (2.2 meter) wide solar panels was imaged by the lander's Instrument Deployment Camera, which is fixed to the elbow of its robotic arm.
More
One of InSight's 7-foot (2.2 meter) wide solar panels was imaged by the lander's Instrument Deployment Camera, which is fixed to the elbow of its robotic arm.
InSight Images a Solar Panel
This artist's impression shows InSight traveling to Mars.
More
This artist's impression shows InSight traveling to Mars.
Artist's Concept of InSight Traveling to Mars
Engineers in a Mars-like test area at NASA's Jet Propulsion Laboratory try possible strategies to aid the Heat Flow and Physical Properties Package (HP3) on NASA's InSight lander, using engineering...
More
Engineers in a Mars-like test area at NASA's Jet Propulsion Laboratory try possible strategies to aid the Heat Flow and Physical Properties Package (HP3) on NASA's InSight lander, using engineering models of the lander, robotic arm and instrument.
JPL Engineers Test Heat Probe Strategies
Virtually explore a Mars simulation facility used by engineers to practice operating NASA's InSight lander, slated to launch in May 2018. Hear from engineer Marleen Martinez Sundgaard as you explor...
More
engineers in lab with test model spacecraft
360 Video: Tour a Mars Robot Test Lab
NASA’s Mars Reconnaissance Orbiter captured this image of a meteoroid impact that was first detected by the agency’s InSight lander using its seismometer. This crater was formed on Feb. 18, 2021.
More
detected by the agency’s InSight lander using its seismometer. This crater was formed on Feb. 18, 2021.
InSight-Detected Impact in February 2021
This map shows the single area under continuing evaluation as the InSight mission's Mars landing site for the mission's May 2018 launch.
More
This map shows the single area under continuing evaluation as the InSight mission's Mars landing site for the mission's May 2018 launch.
Landing Site for InSight
This is an image taken by an engineering model of NASA’s InSight lander during a rehearsal for instrument deployment in a Mars-like testbed at NASA’s Jet Propulsion Laboratory, Pasadena, California.
More
This is an image taken by an engineering model of NASA’s InSight lander during a rehearsal for instrument deployment in a Mars-like testbed at NASA’s Jet Propulsion Laboratory, Pasadena, California.
InSight Instrument Deployment Test in JPL Sandbox
NASA’s Mars InSight lander lifts off from Vandenberg Air Force Base in Central California on May 5, 2018. Also on the Atlas V 401 rocket provided by United Launch Alliance is a technology demonstra...
More
NASA’s Mars InSight lander lifts off from Vandenberg Air Force Base in Central California on May 5, 2018. Also on the Atlas V 401 rocket provided by United Launch Alliance is a technology demonstration called Mars Cube One (MarCO).
InSight Lifts Off
NASA has set a new launch opportunity, beginning May 5, 2018, for the InSight mission to Mars. InSight is the first mission dedicated to investigating the deep interior of Mars. The findings will a...
More
This artist's concept from August 2015 depicts NASA's InSight Mars lander fully deployed for studying the deep interior of Mars.
Artist's Concept of InSight Lander on Mars
While in the landed configuration for the last time before arriving on Mars, NASA's InSight lander was commanded to deploy its solar arrays to test and verify the exact process that it will use on ...
More
While in the landed configuration for the last time before arriving on Mars, NASA's InSight lander was commanded to deploy its solar arrays to test and verify the exact process that it will use on the surface of the Red Planet.
InSight Lander Solar Array Test
What's happened with InSight since it landed on Mars?
More
What's happened with InSight since it landed on Mars?
InSight's Insight
InSight’s solar panels produced roughly 5,000 watt-hours each Martian day, or sol, after the spacecraft touched down in November 2018. But by spring 2022, enough dust had settled on the panels that...
More
InSight’s solar panels produced roughly 5,000 watt-hours each Martian day, or sol, after the spacecraft touched down in November 2018. But by spring 2022, enough dust had settled on the panels that they were only producing about 500 watt-hours each sol.
InSight's Power Generation: After Landing and Spring 2022
The heat shield is suspended above the rest of the InSight spacecraft in this image taken July 13, 2015, in a spacecraft assembly clean room at Lockheed Martin Space Systems, Denver.
More
The heat shield is suspended above the rest of the InSight spacecraft in this image taken July 13, 2015, in a spacecraft assembly clean room at Lockheed Martin Space Systems, Denver.
InSight Aeroshell Coming Together
The “mole,” a heat probe that traveled to Mars aboard NASA’s InSight lander, as it looked after hammering on Jan. 9, 2021, the 754th Martian day, or sol, of the mission. After trying since Feb. 28,...
More
InSight's mole on Mars
InSight's ‘Mole' Comes to Rest
A C-17 cargo aircraft carrying NASA's InSight spacecraft flew from Buckley Air Force Base, Denver, to Vandenberg Air Force Base, California, on February 28, 2018. The spacecraft was being shipped f...
More
military transport aircraft in flight
C-17 Shipping InSight Mars Spacecraft to Vandenberg Air Force Base
NASA’s InSight mission tests an engineering version of the spacecraft’s robotic arm in a Mars-like environment at NASA’s Jet Propulsion Laboratory.
More
NASA’s InSight mission tests an engineering version of the spacecraft’s robotic arm in a Mars-like environment at NASA’s Jet Propulsion Laboratory.
InSight Robotic Arm Test Lift of Wind and Thermal Shield
The solar arrays on NASA's InSight lander are deployed in this test inside a clean room at Lockheed Martin Space Systems, Denver.
More
The solar arrays on NASA's InSight lander are deployed in this test inside a clean room at Lockheed Martin Space Systems, Denver.
InSight Lander in Mars-Surface Configuration
Engineers Marleen Sundgaard (left) and Pranay Mishra measure their test lander's "workspace" -- the terrain where scientists want to set InSight's instruments -- at NASA’s Jet Propulsion Laboratory...
More
Engineers Marleen Sundgaard (left) and Pranay Mishra measure their test lander's "workspace" -- the terrain where scientists want to set InSight's instruments -- at NASA’s Jet Propulsion Laboratory in Pasadena, California.
Measuring the Workspace
This image of the deck of NASA’s InSight lander – where the camera’s rectangular calibration target can be seen in the middle -- was taken by the Instrument Deployment Camera during the assembly, t...
More
This image of the deck of NASA’s InSight lander – where the camera’s rectangular calibration target can be seen in the middle -- was taken by the Instrument Deployment Camera during the assembly, test and launch operations phase at Lockheed Martin Space, Denver.
Test Image of InSight Deck and Calibration Target Before Launch

You Might Also Like

The agency is asking the NASA community to work together to develop a revised plan that leverages innovation and proven technology.
More
NASA Sets Path to Return Mars Samples, Seeks Innovative Designs
NASA Sets Path to Return Mars Samples, Seeks Innovative Designs
NASA has proven powered, controlled flight is possible on other worlds, just as the Wright brothers proved it was possible on Earth.
More
After Three Years on Mars, NASA's Ingenuity Helicopter Mission Ends
After Three Years on Mars, NASA's Ingenuity Helicopter Mission Ends
The agency established the board in May 2023 to evaluate the technical, cost, and schedule plans prior to confirmation of the mission’s design.
More
NASA Releases Independent Review's Mars Sample Return Report
NASA Releases Independent Review's Mars Sample Return Report
A pair of quakes in 2021 sent seismic waves deep into the Red Planet’s core, giving scientists the best data yet on its size and composition.
More
NASA InSight Study Provides Clearest Look Ever at Martian Core
NASA InSight Study Provides Clearest Look Ever at Martian Core
Ten sample tubes, capturing an amazing variety of Martian geology, have been deposited on Mars’ surface so they could be studied on Earth in the future.
More
NASA's Perseverance Rover Completes Mars Sample Depot
NASA's Perseverance Rover Completes Mars Sample Depot
Filled with rock, the sample tube will be one of 10 forming a depot of tubes that could be considered for a journey to Earth by the Mars Sample Return campaign.
More
NASA's Perseverance Rover Deposits First Sample on Mars Surface
NASA's Perseverance Rover Deposits First Sample on Mars Surface